The Safe Environment Module uses Corrosion Inhibiting Skin (CIS) Technology. Once module is unwrapped, CIS molecules emit and adhere to all metal surfaces in your safe or storage case. The single module protects 20 cubic feet for 12 months. The twin pack Safe Environment Module protects 40 cubic feet for 12 months.
 |
 |
| {product id=19} | {product id=20} |
| {product id=8} | {product id=9} |
Gun Protect Kits include one each of Spray Shield, untreated Weapon Wipe, Safe Environment Module and a Cloak providing treatment and storage.
| {product id=8} | {product id=9} |
The Ammo Cloak uses Corrosive Inhibiting Skin (CIS) Technology. Once sealed, the CIS vapor from the Ammo Cloak emits and adheres to the metal parts of the ammunition. This provides a molecular “skin” that prevents corrosion. Smooth, clean ammunition ejects faster and jams less. The CIS will penetrate standard, unsealed factory boxes to protect ammunition. Remove boxes from case and store in Ammo Cloak. The Ammo Cloak shelf life is 12 months for Sporting and 24 months for Tactical. For additional protection in gun safes, get Gun Protect Safe Environment™ Module. It provides 20 cubic feet of CIS protection for 12 months.
 |
 |
To Use Ammo Cloak • Insert ammunition into Ammo Cloak • Close Ammo Cloak with resealable Z-Tie clip (provided) • Mark label on Ammo Cloak with date installed • Replace Ammo Cloak in 12 months • If Cloak is punctured simply tape over the hole and Cloak will remain fully functional • To store Cloak when not in use, fold tightly and hold secure with resealable Z-Tie clip
Q: Can I bury my weapons once I put them in the Cloak?
A: Yes you can. However, you must insert the cloaked weapon in a non-degrading container. The Cloak will
degrade over time underground from the acidity of the dirt. There needs to be a non-degrading barrier between the Cloak and the dirt.
Q: Will the CIS molecules damage my synthetic stock or my optics?
A: No. The CIS molecules will not harm stocks or optic glass.
Q: How do I know CIS is working if I can’t see it?
A: While it’s true you cannot see the CIS technology at work, the proof is simple. Automotive companies store complete engines in bags similar to Cloaks. These engines can be stored in extreme conditions for long periods of time. Once those bags are opened, the engines go directly into the car and are used immediately. The military stores entire tanks, weapons and parts in similar bags.
CIS technology is more advanced, lab tested and scientifically proven.
Q: Will Spray Shield harm my optic glass?
A: We only recommend that optic glass be cleaned and treated with the optic manufacturer’s recommended
solutions.
Q: If my Cloak gets a hole in it, do I have to get a new Cloak?
A: Not necessarily. You can repair punctures with a piece of tape. The idea is to not allow air inside the Cloak. However, if your Cloak is ripped or torn beyond repair, we highly recommend that it is promptly replaced.
Q: I bought two twin packs of the Safe Environment Modules. Is it overkill to have three modules in my safe?
A: That depends on the size of your safe. If your safe is 41-59 cubic feet, then three modules would be better. Safes that are 21-40 cubic feet in size need two modules. If the safe or case is under 21 cubic feet only one module is needed. Each Module is designed to protect 20 cubic feet.
Q: I take the treated weapon Wipes with me when I hunt. Do I need to worry about the scent?
A: Treated Weapon Wipes have a very faint scent. Once the weapon is wiped down, store the Weapon Wipe in the bag
provided and close it. Any faint scent exposed during use will dissipate quickly.
Q: How long will Spray Shield last on my weapons?
A: That depends on the environment. The big advantage for Spray Shield is its low viscosity. It will dissipate over time, However, if the environment is arid it will dissipate quicker than if it was humid. Be sure to protect your weapon completely by storing your cleaned weapon in Gun Protect Weapon Cloaks.
Spray Shield
 |
 |
Corrosion Inhibiting Technology – Ammo & Weapon Cloaks – Safe Environment Modules
Laboratory Test #5444
End User: Red Eagle Technologies / Gun Protect Products
Testing: Confidential November 2012
Testing Contact: Confidential
Conclusions
Corrosion can be prevented on the customer’s metal parts using a combination of both Gun Protect Spray Shield and Gun Protect Weapon Cloak with CIS (Corrosion Inhibiting Skin) Technologies.
Objectives
Show the effectiveness of Gun Protect corrosion prevention products on gun barrel parts submitted by the customer.
Corrosion Inhibition Rating Legend
Methodology
Contact Corrosion Test
-Evaluation testing to show how effective the CIS material is on designated metals when in direct contact
-Conditions – run continuously at 120°F, 100% R.H.
Parts tested with Gun Protect Weapon Cloak were first dipped into Gun Protect Spray Shield prior to being placed in the CSI Cloak bag.
Testing was run in duplicate.
Test Products
Control: Plain poly film, non -CIS.
Gun Protect Weapon Cloak poly, 4 mil: Corrosion Inhibiting Skin for long-term multi-metal protection.
Gun Protect Spray Shield for corrosion protection on steel.
Test Setup Photos
Test Photos
Conclusions and Recommendations
While there is no direct correlation between lab testing hours and “real world” exposure, common rule is that 120 hours of protection would roughly equal 12 months of exposure. Left unprotected, gun barrels will develop corrosion over time. The proposed system of Gun Protect Spray Shield and Gun Protect Weapon Cloak poly bags with a twist tie closure will effectively protect the metal surfaces for the advertised time period of 12 months.
Tactical Grade:
24 Month corrosion protection
Sporting Grade - 12 Month Corrosion Protection
