Posted on

GUN PROTECT Safe Environment Module™

The Safe Environment Module uses Corrosion Inhibiting Skin (CIS) Technology. Once module is unwrapped, CIS molecules emit and adhere to all metal surfaces in your safe or storage case. The single module protects 20 cubic feet for 12 months. The twin pack Safe Environment Module protects 40 cubic feet for 12 months.

 SafeEnviromentGunCaseTurkey6778 LR module surface landing

{product id=19} {product id=20}
{product id=8} {product id=9}
Posted on

GUN PROTECT Ammo Cloaks™

The Ammo Cloak uses Corrosive Inhibiting Skin (CIS) Technology. Once sealed, the CIS vapor from the Ammo Cloak emits and adheres to the metal parts of the ammunition. This provides a molecular “skin” that prevents corrosion. Smooth, clean ammunition ejects faster and jams less. The CIS will penetrate standard, unsealed factory boxes to protect ammunition. Remove boxes from case and store in Ammo Cloak. The Ammo Cloak shelf life is 12 months for Sporting and 24 months for Tactical. For additional protection in gun safes, get Gun Protect Safe Environment™ Module. It provides 20 cubic feet of CIS protection for 12 months.

ammocloak02 ammocloak01

To Use Ammo Cloak • Insert ammunition into Ammo Cloak • Close Ammo Cloak with resealable Z-Tie clip (provided) • Mark label on Ammo Cloak with date installed • Replace Ammo Cloak in 12 months • If Cloak is punctured simply tape over the hole and Cloak will remain fully functional • To store Cloak when not in use, fold tightly and hold secure with resealable Z-Tie clip

Posted on

Frequently Asked Questions

Q: Can I bury my weapons once I put them in the Cloak?

A: Yes you can. However, you must insert the cloaked weapon in a non-degrading container. The Cloak will
degrade over time underground from the acidity of the dirt. There needs to be a non-degrading barrier between the Cloak and the dirt.

Q: Will the CIS molecules damage my synthetic stock or my optics?

A: No. The CIS molecules will not harm stocks or optic glass.

Q: How do I know CIS is working if I can’t see it?

A: While it’s true you cannot see the CIS technology at work, the proof is simple. Automotive companies store complete engines in bags similar to Cloaks. These engines can be stored in extreme conditions for long periods of time. Once those bags are opened, the engines go directly into the car and are used immediately. The military stores entire tanks, weapons and parts in similar bags.
CIS technology is more advanced, lab tested and scientifically proven.

Q: Will Spray Shield harm my optic glass?

A: We only recommend that optic glass be cleaned and treated with the optic manufacturer’s recommended

Q: If my Cloak gets a hole in it, do I have to get a new Cloak?

A: Not necessarily. You can repair punctures with a piece of tape. The idea is to not allow air inside the Cloak. However, if your Cloak is ripped or torn beyond repair, we highly recommend that it is promptly replaced.

Q: I bought two twin packs of the Safe Environment Modules. Is it overkill to have three modules in my safe?

A: That depends on the size of your safe. If your safe is 41-59 cubic feet, then three modules would be better. Safes that are 21-40 cubic feet in size need two modules. If the safe or case is under 21 cubic feet only one module is needed. Each Module is designed to protect 20 cubic feet.

Q: I take the treated weapon Wipes with me when I hunt. Do I need to worry about the scent?

A: Treated Weapon Wipes have a very faint scent. Once the weapon is wiped down, store the Weapon Wipe in the bag
provided and close it. Any faint scent exposed during use will dissipate quickly.

Q: How long will Spray Shield last on my weapons?

A: That depends on the environment. The big advantage for Spray Shield is its low viscosity. It will dissipate over time, However, if the environment is arid it will dissipate quicker than if it was humid. Be sure to protect your weapon completely by storing your cleaned weapon in Gun Protect Weapon Cloaks.

Posted on

Bullet Points – Research

Spray Shield

  • Used by US Military on guns, bomb racks and missile launchers.
  • Made in USA.
  • Stable to minus 70 degrees Fahrenheit. This is the reason guns fire, bombs drop and missiles launch at 45,000+ feet.
  • Repels and displaces moisture. If a weapon is dropped in a lake or pond, clean the weapon normally and apply Spray Shield.
  • Use the Weapon Wipe to apply Spray Shield. It has 256 micro-cavities per square inch to lift the maximum impurities off of weapons.
  • Both Weapon Wipes in the Tactical Grade are treated with Spray Shield.
  • Sporting Grade Weapon Wipes have one treated with Spray Shield and one untreated.
  • Anti-Static. Dust and dirt are not attracted once Spray Shield is applied.
  • Protects, lubricates and cleans at the molecular level in a single application.


CIS_technology safe_env_module


Corrosion Inhibiting Technology – Ammo & Weapon Cloaks – Safe Environment Modules

  • Cloaks and Safe Environment Modules are infused with Corrosion Inhibiting Skin (CIS) Technology.
  • CIS molecules are attracted to and attach to all metal parts.
  • The CIS molecules are heavier than water and air. The molecules can penetrate anywhere air can go.
  • CIS molecules go directly from a solid state to a gas state without going through the moisture state. This means immediate contact and protection.
  • CIS is the newest and most advanced technology available.
  • There are other corrosion protection products on the market. If they don’t contain the advanced technology of CIS, we would not recommend it.
  • This CIS technology is used by US Military on guns and equipment, including wrapping entire tanks for corrosion protection.
  • Similar technology is used in the industrial and automotive sectors. Engines, transmissions and other valuable parts are stored and sealed in bags similar to the Cloaks. After long periods of storage, these items are 100% corrosion free and immediately used on vehicles.
  • All Cloaks, Safe Environment Modules, Weapon Wipes and Spray Shield are Made in the USA.
  • Once Cloaks are sealed, the CIS molecules are activated. They emit from inside the Cloak and attach to all metal parts. Weapons are ready to use right out of the Cloaks.
  • You can remove the weapon from the Cloaks numerous times as long as the Cloaks are rolled up when not in use. Protection period factors in multiple openings.
  • Weapons are ready to use when removed from the Cloak. CIS molecules dissipate when the Cloak is opened. There will be zero residue on the weapon from the Cloak.
  • When gun safes or cases are closed, the Safe Environment Modules emit the CIS molecules and attach to all metal parts.
  • Do not unwrap the modules unless they are ready for use.
  • Cloaks and Safe Environment Modules provide corrosion protection at the molecular level.


Laboratory Test #5444

End User: Red Eagle Technologies / Gun Protect Products
Testing: Confidential November 2012
Testing Contact: Confidential

Corrosion can be prevented on the customer’s metal parts using a combination of both Gun Protect Spray Shield and Gun Protect Weapon Cloak with CIS (Corrosion Inhibiting Skin) Technologies.

Show the effectiveness of Gun Protect corrosion prevention products on gun barrel parts submitted by the customer.
Corrosion Inhibition Rating Legend



Contact Corrosion Test
-Evaluation testing to show how effective the CIS material is on designated metals when in direct contact
-Conditions – run continuously at 120°F, 100% R.H.

Parts tested with Gun Protect Weapon Cloak were first dipped into Gun Protect Spray Shield prior to being placed in the CSI Cloak bag.
Testing was run in duplicate.

Test Products
Control: Plain poly film, non -CIS.
Gun Protect Weapon Cloak poly, 4 mil: Corrosion Inhibiting Skin for long-term multi-metal protection.
Gun Protect Spray Shield for corrosion protection on steel.

Test Setup Photostest_results contact corrosion

Test Photos



Conclusions and Recommendations

While there is no direct correlation between lab testing hours and “real world” exposure, common rule is that 120 hours of protection would roughly equal 12 months of exposure. Left unprotected, gun barrels will develop corrosion over time. The proposed system of Gun Protect Spray Shield and Gun Protect Weapon Cloak poly bags with a twist tie closure will effectively protect the metal surfaces for the advertised time period of 12 months.

130820-Gun Protect Spray Shield Rust Test on SteelPlate